Activate software screen

Activate software screen

You can use this screen to activate a full purchased version of this software. Activation ties your serial number to a specify computer. If you need to move your software to another computer, you will need to use the deactivate software option from the Help menu on the main screen.

Activating

When you purchase any edition, you will receive a serial number that will allow you to activate the software.

Activating the trial over the Internet

STEP 1 - Make sure you have an active Internet connection

STEP 2 - Select 'Activate over the Internet'.

STEP 3 - Enter your serial number and click on the 'Activate over the Internet' button. This will connect to our server and either confirms activation or gives you an error message.

If you have any problems with activation, then please email support@JumbleSaler.com along with the error message.

Activation manually

STEP 1 - Select 'Activate manually (no Internet connection)'.

STEP 2 - Enter your serial number and click on the 'Generate' button. This will put you an activation request code in the box. It will look something like:

        zA4fidBghzhCdz7drUfEIMwV2wu7AkJYF27uzxKtqmJ33jSk6KUX4deeOywKgWsRxdMk9JRzhzd34sdgOh6RwTK4MQQak5
        uXVFB6r0s2vr1+QlTvES3MHdANxd9D3fwozxSVvlR92LQwFSIwOglWvBHjV1zWPfIeJUtfg+FnOmOLK5ADBN7SG2Io+o5
        XoOy023230XoiUmN58QZK/b7xMrVES3kf5Vm/oWPN09c+8=

STEP 3 - Either click on the 'Copy' button to copy this code along with the website address of where it need taking to, or click on 'Save to file' to create a text file on disk of the same information. For example, you can create this on a USB key ring drive.

STEP 4 - Take your activation request code and visit http://www.JumbleSaler.com/Activation.aspx on a machine with Internet access to generate an activation code.   Follow the instructions on this page to generate an activation code. This activation code is specific to the machine you created the activation request code for. Your activation code will look something like:

         cXyLzxT5CXka/1qYieX4rAdIuZ9G/FAYV8AKGh3fPWWz6cPKgaKb+8WLFgyxfvckQRzi3fPgjcMOgAaIG
         Zh7UsyV1t/CAl8Dl3xhJjq0mkMH1b5CDhi13x+NteQjgSFIgC4UaWkshidI9cv0YTC2sJW3OBePuqRA9S
         H85SJjSDFot3hNN+QnFniAme0b34cQiV

STEP 5 - Take the activation code back to the original machine. You will then need to go back to the 'Activate software' screen you were on. Select 'Activate manually (no Internet connection)'.

STEP 6 - You will now see a 'Enter activation code' tab at the top of the page. Click on this.

STEP 7 - Copy your activation code into the box and click on 'Activate'.   Your software will be activated.

If you have any problems with activation, then please email support@JumbleSaler.com along with the error message.